Dimming Driver:Driver includes dimming control wiring for 0-10V dimming systems. Requires separate 0-10V DC dimming circuit. Dims as low as 10%.
Drivers:Two Drivers, Constant Current, Class 2, 2000mA, 100-277V, 50-60Hz, Power Factor 99%
THD:6% at 120V, 11.3% at 277V
DLC Listed:This product is on the Design Lights Consortium (DLC) Qualified Products List and is eligible for rebates from DLC Member Utilities. DLC Product Code: PHQG1YES
UL Listing:Suitable for wet locations.
IESNA LM-79 & LM-80 Testing:RAB LED luminaries have been tested by an independent laboratory in accordance with IESNA LM-79 and LM-80, and have been received the Department of Energy "Lighting Facts" label.
Dark Sky Approved:The International Dark Sky Association has approved this product as a full cutoff, fully shielded luminaire.
Lifespan:100,000-hour LED lifespan based on IES LM-80 results and TM-21 calculations.
LEDs:Multi-chip, high-output, long-life LEDs
Color Consistency:7-step MacAdam Ellipse binning to achieve consistent fixture-to-fixture color.
Color Stability:LED color temperature is warrantied to shift no more than 200K in CCT over a 5 year period.
Color Uniformity:RAB's range of CCT (Correlated Color Temperature) follows the guidelines of the American National Standard for Specifications for the Chromaticity of Solid State Lighting (SSL) Products, ANSI C78.377-2017.
IES Classification:The Type III distribution is ideal for roadway, general parking and other area lighting applications where a larger pool of lighting is required. It is intended to be located near the side of the area, allowing the light to project outward and fill the area.
Effective Projected Area:EPA = 0.75
Maximum Ambient Temperature:Suitable for use in 40°C (104°F) ambient temperatures
Cold Weather Starting:Minimum starting temperature is -40°C (-40°F)
Thermal Management:Superior thermal management with external "Air-Flow" fins.
Lens:Tempered glass lens.
Housing:Die-cast aluminum housing, lens frame and mounting arm.
IP Rating:Ingress Protection rating of IP66 for dust and water
Mounting:Universal mounting arm compatible for hole spacing patterns from 1" to 5 1/2" center to center. Round Pole Adaptor plate included as a standard. Easy slide and lock to mount fixture with ease.
Specular vacuum-metallized polycarbonate
High-temperature silicone gaskets
Formulated for high-durability and long lasting color.
Mercury and UV free. RoHS compliant components. Polyester powder coat finish formulated without the use of VOC or toxic heavy metals.
For use on LEED Buildings:
IDA Dark Sky Approval means that this fixture can be used to achieve LEED Credits for Light Pollution Reduction.
California Title 24:
ALED3T150/D10 with the 0-10V driver option is compliant with 2013 California Title 24 building and electrical codes as a commercial outdoor pole-mounted fixture > 75 Watts mounted up to 24 feet when used with the RAB Stealth Dimmer. Use catalog number STLDIM10 to order a Stealth Dimmer module. Mounting heights greater than 24 feet require only a photocell. See ALED3T150/PCS or ALED3T150/PCS2 for photocell models.
Compatible with Round Poles with a diameter of 2.5" to 6"
RAB warrants that our LED products will be free from defects in materials and workmanship for a period of five (5) years from the date of delivery to the end user, including coverage of light output, color stability, driver performance and fixture finish. See our full warranty here.
Replaces 400W Metal Halide
Buy American Act Compliance:
RAB values USA manufacturing! Upon request, RAB may be able to manufacture this product to be compliant with the Buy American Act (BAA). Please contact customer service to request a quote for the product to be made BAA compliant.
B1 U0 G2