product

Specification grade area lights available in IES Type II distributions. For use in parking lots, roadways, pathways and general area lighting. Patent pending thermal management system. 5 Year Warranty.

Color: Bronze
Weight: 32.0 lbs

Project:

Type:

Prepared By:

Date:

Driver Info

Type:Constant Current
120V:1.31A
208V:0.80A
240V:0.69A
277V:0.60A
Input Watts:153W
Efficiency:98%

LED Info

Watts:150W
Color Temp:5000K
Color Accuracy:71 CRI
L70 Lifespan:100000
Lumens:17834
Efficacy:116 LPW

Technical Specifications

Electrical

Dimming Driver:

Driver includes dimming control wiring for 0-10V dimming systems. Requires separate 0-10V DC dimming circuit. Dims as low as 10%.

Drivers:

Two Drivers, Constant Current, Class 2, 2000mA, 100-277V, 50-60Hz, Power Factor 99%

THD:

6.6% at 120V, 12.1% at 277V

Surge Protection:

4kV

Listings

DLC Listed:

This product is on the Design Lights Consortium (DLC) Qualified Products List and is eligible for rebates from DLC Member Utilities.
DLC Product Code:_PKSJ8MUN

UL Listing:

Suitable for wet locations.

IESNA LM-79 & LM-80 Testing:

RAB LED luminaries have been tested by an independent laboratory in accordance with IESNA LM-79 and LM-80, and have been received the Department of Energy "Lighting Facts" label.

Dark Sky Approved:

The International Dark Sky Association has approved this product as a full cutoff, fully shielded luminaire.

LED Characteristics

Lifespan:

100,000-hour LED lifespan based on IES LM-80 results and TM-21 calculations.

LEDs:

Multi-chip, high-output, long-life LEDs

Color Consistency:

7-step MacAdam Ellipse binning to achieve consistent fixture-to-fixture color.

Color Stability:

LED color temperature is warrantied to shift no more than 200K in CCT over a 5 year period.

Color Uniformity:

RAB's range of CCT (Correlated Color Temperature) follows the guidelines of the American National Standard for Specifications for the Chromaticity of Solid State Lighting (SSL) Products, ANSI C78.377-2017.

Construction

IES Classification:

The Type II distribution is ideal for wide walkways, on ramps and entrance roadways, bike paths and other long and narrow lighting applications. This type is meant for lighting larger areas and usually is located near the roadside. This type of lighting is commonly found on smaller side streets or jogging paths.

Effective Projected Area:

EPA = 0.75

Maximum Ambient Temperature:

Suitable for use in 40°C (104°F) ambient temperatures

Cold Weather Starting:

Minimum starting temperature is -40°C (-40°F)

Thermal Management:

Superior thermal management with external "Air-Flow" fins.

Lens:

Tempered glass lens.

Housing:

Die-cast aluminum housing, lens frame and mounting arm.

IP Rating:

Ingress Protection rating of IP66 for dust and water

Mounting:

Universal mounting arm compatible for hole spacing patterns from 1" to 5 1/2" center to center. Round Pole Adaptor plate included as a standard. Easy slide and lock to mount fixture with ease.

Reflector:

Specular vacuum-metallized polycarbonate

Gaskets:

High-temperature silicone gaskets

Finish:

Formulated for high-durability and long lasting color.

Green Technology:

Mercury and UV free. RoHS compliant components. Polyester powder coat finish formulated without the use of VOC or toxic heavy metals.

For use on LEED Buildings:

IDA Dark Sky Approval means that this fixture can be used to achieve LEED Credits for Light Pollution Reduction.

Other

California Title 24:

ALED2T150/D10 with the 0-10V driver option is compliant with 2013 California Title 24 building and electrical codes as a commercial outdoor pole-mounted fixture > 75 Watts mounted up to 24 feet when used with the RAB Stealth Dimmer. Use catalog number STLDIM10 to order a Stealth Dimmer module. Mounting heights greater than 24 feet require only a photocell. See ALED2T150/PCS or ALED2T150/PCS2 for photocell models.

Compatibility:

Compatible with Round Poles with a diameter of 2.5" to 6"

Warranty:

RAB warrants that our LED products will be free from defects in materials and workmanship for a period of five (5) years from the date of delivery to the end user, including coverage of light output, color stability, driver performance and fixture finish. See our full warranty here.

Replacement:

Replaces 400W Metal Halide

Buy American Act Compliance:

RAB values USA manufacturing! Upon request, RAB may be able to manufacture this product to be compliant with the Buy American Act (BAA). Please contact customer service to request a quote for the product to be made BAA compliant.

Optical

BUG Rating:

B2 U0 G2

Dimensions

Features

  • 66% energy cost savings vs. HID
  • 100,000-hour LED lifespan
  • Type II distribution
  • 5-year warranty

Ordering Matrix

FamilyOpticsWattageMountingColor TempFinishDriver OptionsPhotocell Options
ALED2T150    /D10
  • 2T = Type II
  • 3T = Type III
  • 4T = Type IV
  • 50 = 50W
  • 78 = 78W
  • 105 = 105W
  • 125 = 125W
  • 150 = 150W
  • Blank = Pole mount
  • SF = Slipfitter
  • Blank = 5000K (Cool)
  • N = 4000K (Neutral)
  • Y = 3000K (Warm)
  • Blank = Bronze
  • RG = Roadway Gray
  • W = White
  • Blank = 120-277V
  • /480 = 480V (not available for 150W)
  • /BL = Bi-Level
  • /D10 = 0-10V Dimming
  • Blank = No Option
  • /PC = 120V Button Photocell (Pole mount models only)
  • /PC2 = 277V Button Photocell (Pole mount models only)
  • /PCT = 120-277V Twistlock Photocell (Pole mount models only)
  • /PCT4 = 480V Twistlock Photocell (Pole mount models only)
  • /PCS = 120V Swivel Photocell
  • /PCS2 = 277V Swivel Photocell
  • /PCS4 = 480V Swivel Photocell
  • /WS2 = Multi-Level Motion Sensor 20 ft. (Only available 0-10V dimming models)
  • /WS4 = Multi-Level Motion Sensor 40 ft. (Only available 0-10V dimming models)